Which sand for which job
- Concrete (paver) sand: coarse and sharp, drains well. Use it as the 1 in bed under pavers and in concrete.
- Play sand: washed, screened and soft. Use it for sandboxes.
- Mason sand: fine and smooth. Use it for mortar, and between flagstones.
Do not use play sand or mason sand as a paver bed. Fine sand holds water and lets pavers sink.
How much sand for a sandbox
Fill a sandbox about 12 in (30 cm) deep, leaving a few inches below the rim. A 6 × 6 ft box at 12 in needs about 1.3 cubic yards, roughly 1.8 tons or 72 bags of 50 lb.
Weight of sand
Dry sand weighs about 2,700 lb per cubic yard (1,600 kg per m³). Damp sand from a yard pile is heavier, around 2,900 to 3,000 lb. A 50 lb bag holds about half a cubic foot.
Questions people ask
How many 50 lb bags of sand are in a ton?
Forty. A cubic yard of dry sand is about 54 bags of 50 lb.
How much sand do I need under pavers?
A 1 in layer: about 0.3 cubic yards, or just under half a ton, per 100 square feet.
How much area does a ton of sand cover?
About 240 square feet at 1 inch, or 120 square feet at 2 inches.
Is sand sold by the ton or the yard?
Both. Bulk yards usually price by the ton, while some price by the yard. The calculator shows both.
Sources and data
- Typical sand weights from aggregate supplier tables
- Interlocking pavement guidance: 1 in bedding layer of coarse concrete sand
Last reviewed November 16, 2026 · How we calculate