Skip to content
Measured Yard

Paver Calculator

Everything a paver patio needs in one list: pavers by size with extra for cuts, the gravel base, the sand bed and the joint sand.

Your project

ft
ft

Herringbone and diagonal layouts need more cuts. Curves need the most.

Patios and walkways: 4 to 6 in. Driveways: 8 to 12 in.

in
Fine tune

Keep the bedding sand at about 1 in. More lets pavers settle.

in
Prices (optional)Type your local prices to see what it costs.
$
$

You need

681pavers

Pavers needed · 4 × 8 in

Area
144 sq ft
Base gravel
5.04 tons
Bedding sand
0.68 tons
Joint sand
3 bags50 lb

Shopping list

  • Pavers681 pavers · 4 × 8 in
  • Crusher run for the base5.5 tons
  • Concrete sand for the bed1 ton
  • Polymeric joint sand3 bags · 50 lb

Counts are rounded up so you are never short. Weights are typical. Your supplier's may differ by about 10%.

How many pavers per square foot

PaverPer sq ftPer m²
4 × 8 in4.548
6 × 6 in443
6 × 9 in2.729
12 × 12 in110.8
20 × 10 cm4.650
30 × 30 cm111.1

Add 5% for straight layouts, 10% for herringbone or diagonal patterns and 15% for curves. Keep a few spare pavers for future repairs.

The layers under a patio

  • Compacted base: crusher run, 4 to 6 in (10 to 15 cm) for patios, 8 to 12 in for driveways, packed in 2 in layers. Compaction takes about 20% more material than the finished depth, which the calculator includes.
  • Bedding sand: 1 in (3 cm) of coarse concrete sand, screeded flat.
  • Joint sand: polymeric sand swept into the joints and misted so it hardens.

Dig the base 6 in wider than the patio on every side, so the edges have support.

Joint sand

The amount of joint sand depends on the paver size: small pavers have more joints per square foot. The calculator works it out from the paver size, a 1/8 in joint and a 2 3/8 in paver. Wider joints or tumbled pavers need more.

Questions people ask

How many 4 × 8 pavers are in a pallet?

Often 400 to 500, covering about 90 to 110 square feet. Check with your supplier: pallet sizes vary by brand.

How much base gravel for a 12 × 12 patio?

At 6 inches with compaction, about 3.2 cubic yards: roughly 5 tons of crusher run.

Do I need sand under pavers?

Yes, a 1 inch bed of coarse sand lets you set every paver level. Do not use it to make up for an uneven base.

How much polymeric sand do I need?

Typically one 50 lb bag per 40 to 75 square feet with small pavers, more coverage with large slabs. The calculator estimates it for your paver size.

Sources and data

  • Interlocking Concrete Pavement Institute guidance on base and bedding layers
  • Paver counts from nominal sizes, which include the joint

Last reviewed November 16, 2026 · How we calculate

Next steps in your project