Skip to content
Measured Yard

Deck Board Calculator

Enter the deck size, the board width and length, and the joist spacing. You get the boards to buy, the joists and the fasteners.

Your project

The direction the boards run.

ft
ft

Wood: 1/8 in. Composite: follow the maker, usually 3/16 in.

in

16 in is standard. Composite and diagonal decking often need 12 in.

Fine tune
%
Prices (optional)Type your local prices to see what it costs.
$

You need

29boards

Boards needed · 16 ft

Deck area
192 sq ft
Total board length
416 ft
Rows of boards
26
Joists
13 joists
Screws
710 screws

This counts the deck surface and joists. Beams, posts, ledger and footings must follow your local building code.

Shopping list

  • Deck boards, 5.5 in wide29 boards · 16 ft
  • Joists, 12 ft long13 joists
  • Deck screws710 screws

Counts are rounded up so you are never short.

How many deck boards do I need?

Count the rows: the deck width divided by the board width plus the gap. Multiply by the deck length to get the total board length, add 10% for cuts and staggered joints, and divide by the board length.

A 16 × 12 ft deck with 5.5 in boards and 1/8 in gaps has 26 rows. That is 416 ft of board plus 10%: 29 boards of 16 ft.

Joists and fasteners

  • Joists: the deck length divided by the spacing, plus one. Each is as long as the deck width.
  • Screws: two per board at every joist, plus 5%.
  • Hidden clips: one per board at every joist.

Choose board lengths that match your deck, or that divide into it, to keep waste low. Stagger the joints so they never line up on the same joist twice in a row.

Questions people ask

How many deck screws per square foot?

About 3.2 for 5.5 in boards on 16 in joists, so roughly 320 to 350 screws per 100 square feet.

What gap between deck boards?

About 1/8 in for dry wood and 3/16 in for most composites. Wet pressure-treated boards can go tight: they shrink as they dry.

How far apart should deck joists be?

16 in on center for most decking. Composite boards and diagonal layouts often need 12 in. Check the board maker's rules.

How much waste for deck boards?

10% for a simple rectangle, 15% for diagonal boards or many corners.

Sources and data

  • Board makers' installation guides for joist spacing and gaps
  • Fastener counts from two screws per board per joist

Last reviewed November 16, 2026 · How we calculate

Next steps in your project